ASSEMBLY SYSTEM ACCESSORIES

The INSIGHTqcTM controller is compatible with a variety of plug and play accessories to maximize productivity for your manufacturing line. With four onboard USB ports, several accessories can be used simultaneously. Please refer to the Accessories guide below.

ACCESSORIES FOR ANY APPLICATION:

• Socket Tray

  Model	: QC-SKTR
  Ordering Number	: 47615828001

  

  Details & Specifications:

  • Only a 4 position socket tray is available, but up to 4 socket trays can be connected to a single INSIGHTqc controller, for a total of 16 socket tray positions on a single controller
  • Connects directly to the INSIGHTqc controller via USB cable (provided)
  • Plug and Play Easy Setup
  • Powers directly from the USB port, no external power connections required
  • Pre-wired, pre-assembled
  • Screw on USB connector for a robust connection
  • Socket tray is a proximity switch type

• Bit Tray

  Model	: IC-BIT-8
  Ordering Number	:

  

  Details & Specifications:

  • Only a 8 position bit tray is available, but up to 4 bit trays can be connected to a single INSIGHTqc controller, for a total of 32 bit tray positions on a single controller
  • Connects to the INSIGHTqc controller via DIO box
  • Easy Setup
  • Requires a 24V power supply
  • Screw on connector for a robust connection
  • Socket tray is an inductive proximity switch type

  Cable Specifications:

  IR Part Number	Cable Length (Meters)	Description
  IC-19PIN-5M	5	8-position socket tray cord set with one set fly lead
  IC-19PIN-5M	10	8-position socket tray cord set with one set fly lead

• USB 8x8 Digital I/O Box

  Model	: QC-DIO-8CH
  Ordering Number	: 47617332001

  

  Details & Specifications:

  • 8 Octo-coupled Isolated Inputs with associated LED status lights
  • 8 Relay contact outputs with associated LED status lights
  • USB Plug and Play for easy setup
  • Ability to Sink or Source the outputs
  • Internal 24V (Low Current Applications)
  • External 24V Connections available for higher current requirements
  • Screw-on USB connector for a robust connection
  • Power LED indicator
  • Plug type connectors with screw - clamping yoke
  • Mountable to controller or flat surface with INCLUDED brackets
  • Maximum recommended USB cable length is 5 Meters
  • Up to 4 USB DIO boxes can be connected and programmed with a single controller, providing a maximum of 32 inputs and 32 outputs

• USB to Serial RS-232 Adapter

  Model	: QC-ADPT-1
  CCN	: 47601630001

  

  Details & Specifications:

  • USB to RS232 Serial Adapter
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
  • Fully assisted hardware or X-On / X-Off software handshaking
  • Data transfer rates from 300 baud to 250 kilo-baud at RS232 voltage levels

• DC Tools Cable & Extensions

  CPS2 cables are only compatible with QE2 serials

  

  Cable Specifications:

  Type of cable	Length	Part number
  Standard tool cable	3m	GEA40-CORD-3M
  	6m	GEA40-CORD-6M
  	10m	GEA40-CORD-10M
  Standard 90° cable (90° on side tool)	3m	GEA40-CORD-3M-90
  	6m	GEA40-CORD-6M-90
  	10m	GEA40-CORD-10M-90
  Flexible power cable	3m	CPS2-CORD-3M
  	6m	CPS2-CORD-6M
  	10m	CPS2-CORD-10M
  	15m	CPS2-CORD-15M
  	50m	CPS2-CORD-50M
  	6m/90°	CCPS2-CORD-6M-90
  Extension cable	10m	GEA40-EXT-10M
  	20m	GEA40-EXT-20M
  	40m	GEA40-EXT-40M
  90° extension cable (Controller side)	1.5m	GEA40-INT-02
  	2m	GEA40-INT-04
  	2.5m	GEA40-INT-06
  	3m	GEA40-INT-08